Baxley Equipment

Your Source for Sawmill Technology

Curve Canter

Infeed Module

-     Heavy 1-1/4″ steel precision line-bored frame with precision leveling pads.

-     (2) “Super Knurl” chromed bottom press rolls.

-     (2) Radial fluted chromed top press rolls for precision control of cant.

-     Two-stage 6″ press roll cylinders for pre-setting on 4″ & 6″ and cants with capability to run 8″ - 10″ Cants when required.

-     Roller chain bed-roll and press-roll drive.

-     25 H.P. Vector duty rated motor for variable speed operation with Rex reducer.

-     VFD with dynamic braking.  By Customer.

-     Eccentric pressroll chain tensioning take-ups.

-     Automatic hydraulic chain tensioner.

Curved Canter Module

-     Heavy duty construction pivot support base with precision leveling pads.

-     Pivot point mounted at the front cutting edge of the canter heads.

-     Rotational motion (6 degrees max. from co-linear with through feed) on a oversize Timken bearing, bas mounted and linear positioner actuated.

-     Heavy wall tube steel canter assembly support frame, machined and keyed for precision alignment with pivot mount.

-     Heavy duty integral “wrap around” anvils to support cant through curve canting process.

-     (8) Precision linear bearings and way with 80,000# load rating per bearing in all directions.

-     (2) 23″ diameter (across face plate) conical head assemblies.  Linear positioned.

-     (6) Knife heads required for feed speeds.

-     System is quoted with Lindex closed style heads.  Other brand heads can be used.

-     Heads are fully loaded but does not include knives or spares.

-     Bolt on replaceable chip chutes and head guards.

-     (2) 250 H.P. canter head drive assemblies with TEFC motors.

Outfeed Module

-     Heavy 1-1/4″ steel precision line-bored frame with precision leveling pads.

-     (2) “Super Knurl” chromed bottom press rolls.

-     (2) Radial fluted chromed top press rolls for precision control of cant.

-     Two-stage 6″ press roll cylinders for pre-setting on 4″ & 6″ and cants with capability to run 8″ - 10″ Cants when required.

-     Roller chain bed-roll and press-roll drive.

-     25 H.P. Vector duty rated motor for variable speed operation with Rex reducer.

-     VFAC controller with dynamic braking.

-     Eccentric pressroll chain tensioning take-ups.

Automatic hydraulic chain tensioner.

Contact Sales

×