Baxley Equipment

Your Source for Sawmill Technology

Lineal Edger Feed Table


- 10” turned, straight knurled, and chromed feed rolls with 10 HP VFAC serpentine belt Rex C-Face drive.

- Three (3) overhead powered smooth chromed pressrolls with UHMW nose cones and 3HP v-belt drives
  • Dual press roll cylinders utilized to minimize press roll movement in normal run mode but still allowing a jam clear function.
  • UHMW cylinder clevis pin for strength, wear and resiliency.

- Air actuated pivoting parking ramps.

- Air blow off on all photo eyes with protected mounting assemblies.

- Pre-wired and pre-plumbed.

Contact Sales